Driver's Seat is an item in Scrap Mechanic.
Press E to get in or out of the Driver's Seat.
If connected to a Thruster, holding W will activate it.
If connected to a Controller, pressing W will activate it and pressing S will deactivate it.
If connected to a bearing, D will turn the bearing forward and A will turn it backward. In order to get proper steering in a vehicle, all bearings must be rotating clockwise as viewed from above.
The Seat is a part that also allows players to ride a creation, but lacks steering controls. It can still be connected to buttons like the Driver's Seat.
The Driver's Saddle functions the same as the Driver's Seat. The distinction is that it is 3 blocks wide instead of 4 blocks, with a different model to fit. It was created so that creations with odd widths can have a centered seat.
Upgrading the Driver's Seat Bearing connections and at the last level special settings.
Use the Connect Tool at max level to access the settings on connected bearings.
|1||8||Durability Increases to 4|
|2||12||Weight Decreases to 4
Durability Increases to 5
|3||16||Durability Increases to 6|
|5||20||Allows adjustment of connected bearings|
setting max rotation, speed and bearing reset
Weight Decreases to 3
Durability Increases to 7
- Added the 5 different upgrade levels.
- Added Driver's Seat.